To reconcile Bill.com with the books, compare the same things on both sides as of the same day: open bills by vendor, AP aging, payments made and the vendor list. An AI agent connected through DeepLedger can read Bill.com and the company's QuickBooks Online or Xero in one conversation and give you the differences in one table. DeepLedger never pays, approves or sends anything in Bill.com, and for a reconciliation you ask it to change nothing at all.
This guide is for accounting firms, bookkeepers and AP teams who run payables in Bill.com (now BILL) next to QuickBooks Online or Xero. It covers why the two drift apart, the setup, a step-by-step check with prompts, and the limits to know.
Why Bill.com and the books drift apart
Bill.com and the ledger keep their own copies of bills and payments. Most firms sync them with BILL's own integration, and the copies still disagree for ordinary reasons:
- A bill entered in one place only, for example straight into QuickBooks or Xero by someone who did not use BILL.
- A payment recorded twice, once from BILL's sync and once by hand or from the bank feed.
- Timing. A bill approved or paid in BILL after the last sync, or a sync that stopped on an error.
- Vendor credits. BILL counts an applied vendor credit in the bill's paid amount, so a bill can look part paid in BILL while the ledger shows a credit and an open bill.
- Archived vendors whose bills are still open on one side.
- A different entity. A BILL organization connected to the wrong company's books.
None of this is hard to find by hand, but it means reading two systems line by line. That reading is the part an AI agent does well.
What the AI agent reads on each side
| Bill.com (read through DeepLedger) | QuickBooks Online or Xero |
|---|---|
| Bills with vendor, due date, payment status and approval status | Bills with vendor, due date and balance |
| AP aging as of today, by vendor and currency | AP aging report as of any date (in Xero, per supplier, or open bills as of today) |
| Payments made to vendors, with status and process dates | Bill payments |
| Vendor credits | Vendor credits (credit notes in Xero) |
| Vendors, including archived ones | Vendors (suppliers or contacts in Xero) |
Two safeguards help before you compare anything. Bill.com records come back without bank and card details or tax ids. And if the BILL organization's country or currency is not the ledger's, DeepLedger adds a warning that the data may belong to another entity.
Before you start
- A DeepLedger account. The trial needs no card.
- The company in DeepLedger with QuickBooks Online or Xero connected.
- Bill.com connected to the same company with your own BILL credentials. A BILL administrator creates them in BILL; the Bill.com MCP guide walks through where to find each value.
- An AI app that can add a custom MCP connector.
Each Bill.com connection is priced like a ledger connection; see pricing.
How do I connect it?
- Connect Bill.com to the company. A DeepLedger owner or admin opens Companies, chooses the company, then Connections → Bill.com, pastes your BILL credentials and connects. Do this once per company: each entity's BILL organization connects to its own DeepLedger company.
- Add DeepLedger to your AI app with the address
https://mcp.deepledger.ai/mcp, and sign in with your DeepLedger account, not your BILL login. - Check both sides are there:
Using DeepLedger, which company am I in? Does it have Bill.com connected, and which accounting software does it use?
Adding the connector in each app:
- Claude: Customize → Connectors, + Add, Add custom connector, name it DeepLedger and paste the address. Full steps: connect Claude to Bill.com.
- ChatGPT: chatgpt.com/plugins, +, Add custom MCP server, enter the address and choose OAuth. Switching between companies needs a ChatGPT Business, Enterprise or Edu workspace (as of November 2026). Full steps: connect ChatGPT to Bill.com.
- Gemini: on the web, Settings, then Connected Apps, and add a custom app with the address. The steps match the Gemini guide for Xero.
- Grok: grok.com/connectors, New Connector, Custom, paste the address. Full steps: connect Grok to Bill.com.
- Microsoft Copilot Studio: a Model Context Protocol tool with the address and a personal DeepLedger API key. Create the key for All my companies so the agent can switch. Full steps: connect Copilot to Bill.com.
- Cursor: connect Cursor to Bill.com.
A step-by-step Bill.com reconciliation
Start every prompt with "do not change anything". Name the company, and run the steps in order: each one narrows what the next has to look at.
1. Compare AP aging as of today
In Cedar Dental Group, do not change anything. Get Bill.com AP aging as of today, then the AP aging report from the books as of today. Make one table by vendor with both totals and the difference. Keep currencies separate.
Bill.com aging is always as of today, because BILL gives only today's balances. That is why the ledger side is run as of today too. A vendor whose totals agree usually needs no more work.
2. Match open bills for the vendors that differ
For each vendor with a difference, list open bills in Bill.com and open bills in the books, matched by vendor invoice number. Show bills that appear on only one side, and bills whose open amount differs.
Bills on one side only are usually a bill entered outside BILL, or one that never synced. A different open amount often means a payment or a vendor credit recorded on one side only.
3. Check payments made in the period
List Bill.com payments made to vendors with a process date in October 2026, and bill payments in the books dated in October 2026. Match them by vendor and amount, and list anything on one side only or recorded twice.
4. Look at bills waiting for approval
List Bill.com bills that are waiting for approval, with vendor, amount and due date. Say which of them are already in the books.
A bill waiting for approval in BILL may or may not be in the ledger yet, depending on how the firm's sync is set up. Knowing which ones explains part of the aging difference.
5. Compare the vendor lists
Compare active vendors in Bill.com with vendors in the books. List vendors on one side only, near-duplicate names, and archived Bill.com vendors that still have open bills.
6. Turn the differences into tasks
Summarize every difference you found in one table: vendor, side, document, amount and the likely cause. Create a task for each one that needs a person to decide.
The tasks appear in DeepLedger for a reviewer to work through. Fix each difference where it belongs: in BILL, in the ledger, or in the sync settings.
What the AI agent can and cannot do here
- It reads both sides and does the matching and arithmetic.
- It can draft, if you ask. In Bill.com it can save a missing bill unapproved and unpaid, or create a vendor credit. In the ledger, writes follow the ledger's own rules. Ask for these one at a time, after you have reviewed the difference.
- It never pays, approves or sends anything in Bill.com, never records payments there and never changes approval workflows. Approvals and payments stay in BILL with the people you authorize.
Limits worth knowing
- Bill.com aging is today only. For a month-end comparison, run it on the last day of the month, or compare transactions by date instead.
- Up to 5,000 records go into a Bill.com aging; a larger result says it was cut.
- Currencies stay apart. Amounts in different currencies are never added together.
- One BILL organization per company. Each entity's BILL organization connects to its own DeepLedger company.
Frequently asked questions
Can an AI agent compare Bill.com with QuickBooks Online or Xero?
Yes. When a company in DeepLedger has Bill.com connected next to QuickBooks Online or Xero, one AI agent reads both in the same conversation: open bills, AP aging, payments made and vendors on the BILL side, and the matching bills, aging and payments in the ledger. It lists the differences for you to review.
Will the AI agent fix the differences in Bill.com?
Not on its own, and never by paying or approving. DeepLedger never pays, approves or sends anything in Bill.com. For a reconciliation, ask the AI agent to change nothing and to list each difference; a person then fixes it in BILL or in the ledger, or asks the AI agent for a specific draft.
Why does Bill.com AP aging only show today?
BILL gives only today's balances, so DeepLedger's Bill.com aging is always as of today. Run the ledger's AP aging as of today as well, so both sides cover the same moment.
Which AI apps can do this?
Any AI app that can add a custom MCP connector: Claude, ChatGPT, Gemini, Grok, Microsoft Copilot Studio, Cursor and your own agents. All of them use the same address, https://mcp.deepledger.ai/mcp.
What do I need to connect Bill.com?
Your own BILL credentials for each organization: a BILL administrator creates them in BILL, and a DeepLedger owner or admin pastes them on the company's Connections tab. The company also needs QuickBooks Online or Xero connected for the comparison.
Related guides
- Bill.com MCP server guide
- Accounts payable month-end close
- Find duplicate bills and invoices in QuickBooks
See the Bill.com connection on the Bill.com MCP page and every supported app on AI platforms and integrations.